58 | CR 30-X, CR 30-Xm | Getting started
Remove the cassette and insert the next one
At the digitizer:
1. When the digitizer has finished treating the cassette, the status indicator
constantly lights up in green.
2. Remove the cassette from the cassette slot.
When the digitizer unlocks the cassette, it is ready to be re-used
immediately.
Related Links
Re-erasing an Image Plate
2386I EN 20151020 1518
WARNING:
When CR MD4.xT plates and cassettes have not been used
for 48 hours, they must be erased manually. When CR
MM3.xT plates and cassettes have not been used for 24
hours, they must be erased manually.
on page 72