10 | CR 30-X, CR 30-Xm | Introduction to CR 30-X/CR 30-Xm
Intended Use
This digitizer must only be used to scan exposed X-ray cassettes, containing an
erasable image plate (IP). The digitizer is part of a system, consisting of X-ray
cassettes with erasable phosphor image plates and a workstation where the X-
ray cassettes are identified.
The CR system is used in a radiological environment by qualified staff to read-
out, process and route static X-ray radiographic images.
Intended User
This manual has been written for trained users of Agfa products and trained
diagnostic X–Ray clinical personnel who have received proper training.
Users are those persons who actually handle the equipment and those who
have authority over the equipment.
Before attempting to work with this equipment, the user must read,
understand, note and strictly observe all warnings, cautions and safety
markings on the equipment.
System Configuration
Topics:
•
Main System Configuration
•
Configuration with Fast ID
•
Configuration with ID Tablet
•
Optional System Components
2386I EN 20151020 1518