Main System Configuration - AGFA CR 30-X User Manual

Main System Configuration

The system has the following configuration:
• The CR 30-X or CR 30-Xm digitizer, a digitizer for image plates retaining
latent X-ray images. The digitizer accepts one cassette containing one
image plate at a time.
• The NX workstation, either a dedicated CR workstation or two CR
workstations with ID Tablet, for cassette identification, image processing
and image transmission of digitized images received from the digitizer.
• Cassette and plate system: CR MD4.0T General and CR MD4.0T FLFS.
• For CR 30-Xm additionally: CR MM3.0T Mammo and CR MM3.0T
Extremities.
CR 30-X, CR 30-Xm | Introduction to CR 30-X/CR 30-Xm | 11
2386I EN 20151020 1518