Safety Directions - AGFA CR 30-X User Manual

CR 30-X, CR 30-Xm | Introduction to CR 30-X/CR 30-Xm | 41

Safety Directions

WARNING:
Safety is only guaranteed when an Agfa certified field service
engineer has installed the product.
WARNING:
The user is responsible for judging image quality and controlling
environmental conditions for diagnostic softcopy or print
viewing.
WARNING:
The user must follow the hospital quality assurance procedures
for covering the risks resulting from errors in the image
processing
WARNING:
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
WARNING:
Position the digitizer so that it is possible to disconnect it from
the mains power if required.
WARNING:
The following actions may lead to serious risk of injury and
damage to the equipment as well as making the warranty
void:
Changes, additions or maintenance to the Agfa products carried
out by persons without appropriate qualifications and training.
Using unapproved spare parts
WARNING:
To avoid images being lost due to a power failure, the
workstation and the digitizer have to be connected to an
uninterruptable power supply (UPS) or an institutional standby
generator.
WARNING:
Operation outside of the specified environmental conditions
may lead to deterioration of image quality. For best results, keep
the environmental conditions within these specifications.
2386I EN 20151020 1518