Configuration With Fast Id - AGFA CR 30-X User Manual

12 | CR 30-X, CR 30-Xm | Introduction to CR 30-X/CR 30-Xm

Configuration with Fast ID

The digitizer is dedicated to a single workstation, on which the identification
software as well as the image processing software is running. The
identification data are transmitted from the workstation to the digitizer via
DICOM Ethernet. For more information, refer to the workstation's On-line
Help manuals or contact your local service organization.
Digitizer
1.
Control PC
2.
2386I EN 20151020 1518
1
2
The digitizer must not be connected to any version of the Agfa
TM
ADC QS or ADC VIPS
TM
software.