As a result, the digitizer starts erasing the image plate:
• The upper part of the status indicator is continuously lighting up in
blue.
• The lower part of the status indicator is flashing green.
When the digitizer has finished erasing the cassette, the upper part of the
status indicator is not lit and the lower part is constantly lit in green.
4. Remove the cassette from the cassette slot.
5. To erase a second cassette, the erase mode has to be accessed again.
CR 30-X, CR 30-Xm | Operating CR 30-X/CR 30-Xm | 73
2386I EN 20151020 1518