54 | CR 30-X, CR 30-Xm | Getting started
Select a patient and start the exam
At the NX workstation:
1. Open the Worklist window of NX.
In the Worklist window, you can view and manage the exams that are
scheduled via the Worklist pane.
2. In the Worklist window, open a patient from the RIS or enter patient data
manually.
To open a patient from the RIS, select an Exam from the list (1) and click
on Start Exam (2).
To enter patient data manually, click New Exam (3) and enter patient data
and image data manually.
For more information, refer to the NX User Manual, document 4420.
2386I EN 20151020 1518
Note: When starting the NX software, the Worklist window is
the first window that appears after the NX Splash screen.
Note: Start the NX software on the NX workstation. Refer to the
NX User Manual, document 4420.
3
1
2