One Point Mode (1P) - AGFA DX-D User Manual

One Point Mode (1P)

By selecting one of the AEC field buttons, the one point mode is activated.
The value of kVp, mAs, mA, max ms, the setting of focal spot, density,
sensitivity, patient size and the selected AEC fields can be adjusted.
The value of mAs is the max mAs. The default value for max mAs is the highest
supported value.
The value for ms is not available.
Disabling all AEC fields will switch to two point mode.
After exposure all values reflect the settings actually used by the generator.
Figure 18: 1P working mode
Related Links
Automatic Exposure Control (AEC)
Radiographic Parameters
DX-D Software Console | Operating the DX-D Software Console | 41
on page 37
on page 33
0189D EN 20180329 1421