Digitize The Image - AGFA CR 30-X User Manual

Digitize the Image

1. The digitizer will start digitizing the image plate.
The digitizer converts the information of the latent image to digital data.
2. After digitizing, the digitizer:
• Transmits the digital image data to the image processing station
('destination').
• Erases the image plate and re-inserts it into the cassette.
• Gives the cassette ID data the status 'erased'.
• Unlocks the cassette.
CR 30-X, CR 30-Xm | Getting started | 63
2386I EN 20151020 1518