CR 30-X, CR 30-Xm | Introduction to CR 30-X/CR 30-Xm | 13
Configuration with ID Tablet
Two workstations can serve a shared digitizer, provided that each workstation
has an ID Tablet. There is no physical link required between the workstation
and the digitizer.
In this configuration, a cassette can be identified using any of the
workstations. The patient demographic data and examination data are
entered via the identification software and stored on the RF-tag of the cassette
via the ID Tablet.
The image is sent to the workstation where the cassette has been identified.
The image can not be rerouted to the other workstation.
2386I EN 20151020 1518