Making An Exposure Using A Cassette; Setting The Exposure Parameters On The X-Ray Generator Control Panel - AGFA DR 100e User Manual

Making an exposure using a cassette

To make an exposure using a CR cassette, the manual exposure mode can be
activated. Exposure parameters are set using the X-ray generator control panel
by selecting an anatomic program or by entering exposure parameters for a
free exposure. No image will be acquired on the NX workstation.
Figure 32: Switch to manual exposure mode and open the list of anatomical
programs
Figure 33: Free exposure
Setting the exposure parameters on the X-ray generator control
panel
1. Set the exposure parameters for an anatomic program.
For making a free exposure, continue with the next step, adjusting the
exposure parameters.
a) Press the button to open the list of anatomic programs.
Figure 34: Anatomic programs
An anatomic group is displayed on the first line of the display, with the
anatomic programs listed below.
b) To switch to another anatomic group, press the F1 button on the
console repeatedly.
Figure 35: Select anatomic group
c) To scroll down the list of anatomic programs, press the button to scroll
pages.
DR 100e (Digital Radiography) | Advanced Operation | 89
0365B EN 20181015 0853