AGFA CR 30-X User Manual page 90

90 | CR 30-X, CR 30-Xm | Technical Data
Temperature
Environmental conditions (during transport)
In line with IEC721-3-2: 2K2 and 2M2 with following restrictions:
Temperature
Vibration
Environmental conditions for mobile installation (during transport)
In line with IEC721-3-5: 5K2 and 5M2 with following restrictions:
Vibration
Environmental conditions for mobile installation (during operation)
In line with IEC721-3-3: 3K2 and 3M1 with following restrictions:
Temperature
Relative Humidity
Vibration
Warming-up time
Cold start
Warm start
Throughput
CR MD4.0T 35 x 43 cm
CR MD4.0T 35 x 35 cm
CR MD4.0T 24 x 30 cm
CR MD4.0T 18 x 24 cm
CR MD4.0T 15 x 30 cm
CR MM3.0T 24 x 30 cm
CR MM3.0T 18 x 24 cm
2386I EN 20151020 1518
-25 °C to +55 °C
-25 °C to +60 °C
5-200 Hz (vertical, longitudinal,
transversal axis)
5-150 Hz (all axis), 1m/s², sinusoidal
vibration
+15 °C to +30 °C
15% to 75% (non-condensing)
40-200 Hz; 1m/s²; sinusoidal
vibration
fully operational after max. 30 min.
fully operational after self-test, on
condition that the digitizer:
• has not been switched off for more
than 3 minutes.
• has been operational for at least
30 minutes.
60 plates/hour
60 plates/hour
71 plates/hour
76 plates/hour
82 plates/hour
32 plates/hour
38 plates/hour