56 | CR 30-X, CR 30-Xm | Getting started
Identify and Digitize the Image
An unidentified cassette is inserted in the digitizer. The NX software must be
operational, otherwise the digitizer is locked and the status indicator is
flashing red.
At the NX workstation:
1. Click ID in the examination window of NX.
In the Examination window, select the thumbnail in the Image overview
pane and click on ID to send the data to the digitizer.
2. As soon as the digitizer has received the complete identification data from
the NX workstation (via Ethernet) it will start digitizing the image plate.
The digitizer converts the information of the latent image to digital data.
3. After digitizing, the digitizer:
• Transmits the digital image data to the image processing station
• Erases the image plate and re-inserts it into the cassette.
• Gives the cassette ID data the status 'erased'.
• Unlocks the cassette.
2386I EN 20151020 1518
('destination').