Digitizer Remote Display - AGFA CR 30-X User Manual

Digitizer Remote Display

Digitizer Remote Display is an application running on the NX PC.
To verify if Digitizer Remote Display is running, check if the Digitizer Remote
Display icon is present in the Windows taskbar:
To start the Digitizer Remote Display, go to the Windows Start menu >
Startup and click DigitizerRemoteDisplay.
The Digitizer Remote Display dialog contains information about the status of
the digitizer.
Error message
1.
Error code
2.
Date and time of error
3.
Confirm button
4.
Connection status and IP address
5.
Digitizer Remote Display in a configuration with ID Tablet
If two workstations serve a shared digitizer, the Digitizer Remote Display is
available on only one of the workstations. In order to view the messages or to
perform an action required by an error condition, this workstation must be
started.
CR 30-X, CR 30-Xm | Operating CR 30-X/CR 30-Xm | 79
1
2
3
4
5
2386I EN 20151020 1518