Table of Contents
Advertisement
DR 400 (Radiographic wall stand) | Bucky | 49
Bucky configuration
Cassette only configuration
The workflow with cassettes requires removing the cassette from the bucky
after each exposure. The cassette has to be scanned using a digitizer to get the
final image.
The correct orientation of the cassette is applied by the way it is inserted in the
bucky and there is no need to use the rotation mechanism.
In this configuration the rotation mechanism can be blocked during
installation by the service engineer.
Fixed DR Detector configuration
The bucky for the fixed DR detector has no clamping or rotation mechanism.
The detector is permanently fixed in the bucky and can not be removed. The
detector has a square format and requires no rotation.
Radiographic wall stand configuration
The cassette or detector can be positioned centered or aligned with the upper
edge of the bucky, to allow chest exams with patient chin resting at the wall
stand front panel.
The bucky is available for left and right side loading of the wall stand.
3256C EN 20221124 1627
Advertisement
Table of Contents
