2.6. GENERATOR INTERFACE USE
Press GEN_X key, to get access.
It is possible at any time to go to Table or Camera menu pressing TABLE or CAM.
Refer to generator interface User Manual for more details
2.7. DIGITAL SYSTEM CONTROL CONSOLE USE
Refer to Digital System User Manual
2.8. DETECTOR USE (for version with removable detector)
To insert the detector, press Detector-IN button
insert the detector in its support and connect it.
Refer to Digital System User Manual
Digital Remote Controlled Table with dynamic flat panel detector
To remove the detector from its rotating support, press Detector-OUT button
The support moves to Portrait format, the tabletop moves laterally to maximum on
column side; when movements are finished, the detector is accessible, then release
the key. Press the latch, unplug the detector from the connector on left side and then
remove it.
User's Manual
. When movements are finished, release the key,
27
.