Table of Contents
Advertisement
S
torage and dismantling
S
torage of the equipment or prolonged stop
D
ismantling, decommissioning and disposal
The symbol of the cancelled bin (where present) indicates that the product must not be
disposed of with domestic waste at the end of its useful life.
This product must be delivered to the waste collection point of the local community for
recycling.
For further information, refer to the public body responsible for waste disposal in the country.
Dispose of the various types of materials that the parts of the equipment consist of in dumps
that are suitable for the purpose.
If the equipment is not used immediately or is stored for long periods,
check that it is correctly packed and contact ABB for storage instructions.
The equipment must be stored in well-ventilated indoor areas having no
characteristics that could damage the components of the equipment.
Restarting after a long or prolonged stop requires a check and, in some
cases, the removal of oxidation and dust that will also have settled inside
the equipment if not suitably protected.
ABB is not responsible for any loss of the equipment, or part of it, which
does not take place on the basis of the regulations and laws in force in
the country of installation.
Inappropriate disposal of waste can have a negative impact on
the environment and human health owing to potentially dangerous
substances.
By cooperating in the correct disposal of this product, you contribute to
the reuse, recycling and recovery of the product, and the protection of
our environment.
COMPONENT
Frame, brackets, supports
Casing or covers
Paint
Gaskets and seals
Electrical cables
Cable trays
Batteries
- 185 -
8 - Maintenance
MATERIAL OF CONSTRUCTION
Arc-welded steel FE37, aluminium
ABS, plastic
Polyester Resin
Rubber / Teflon / Viton
Copper / Rubber
Polyethylene / Nylon
Nickel / Lead/ Lithium
Advertisement
Table of Contents
