Table of Contents
Advertisement
3. To remove the dovetail guide
the two screws
No. 3.
1
Fig. 11
4. Attach the specimen clamp
and fasten it using the two screws
4.6
Attaching the knife holder base, non-orientable
1
5
2
4
Fig. 12
• Release the clamping lever
(Position
= released)
• Insert the universal knife holder base
the T-piece
(→ Fig. 12-1)
• To secure the knife holder base, turn the clamping lever
(Position
= locked)
Leica RM2125 RTS
(→ Fig. 10-2)
(→ Fig. 10-4)
from the dovetail guide
(→ Fig. 11-1)
(→ Fig.
3
(→ Fig. 12-2)
by rotating it counterclockwise.
(→ Fig. 12-3)
of the microtome base plate
from the specimen clamp
(→ Fig.
10). Again, use the Allen key
to the specimen holder fixture as shown
10-4).
using the notch
(→ Fig. 12-4)
(→ Fig.
12-5).
(→ Fig. 12-2)
Instrument Setup
(→ Fig.
10-3), unscrew
(→ Fig. 11)
on the bottom into
clockwise.
4
23
Advertisement
Table of Contents
