Attaching The Knife Holder Base, Non-Orientable; Inserting The Knife Holder, Non-Orientable - Leica RM2125RTS Manual

4. Startup
4.6

Attaching the knife holder base, non-orientable

19
23
20
22
4.7

Inserting the knife holder, non-orientable

18
• Release the clamping lever (20) by rotating it
• Insert the universal knife holder base (21)
• To secure the knife holder base, turn the
21
Fig. 10
• Loosen the Allen screw (24) by turning it
25
• Slide the notch of the knife holder (25) onto
• To clamp, turn the Allen screw (24) clock-
26 21
24
Fig. 11
counterclockwise.
(Position = released)

using the notch (22) on the bottom into the
T-piece (19) of the microtome base plate
(23).
clamping lever (20) clockwise.
(Position = locked)

counterclockwise.
the T-piece (26) of the knife holder base (21).
wise.
Instructions for Use, V 2.1 – 10/2012