Table of Contents
Advertisement
3.38 TE 745 (FS) keyboard unit
TE 745 (FS), NC operating panel in stainless-steel design (corresponds to TE 740),
machine operating panel is integrated (same as MB 720), for 19 inches, with touchpad
TE 745 (FS) pin layout
TE connector
Function
X2: USB Type B
USB connection with BF 760. The TE 745 is connected with the USB hub of the
BF 760. The maximum permissible cable length for this USB connection is 3 m.
The USB hub of the TE 745 only supports USB 1.1.
X40: USB Type B
USB connection for execution of the USB connection from the BF 760 to the
USB connector in the front of the TE
X1
Screen soft keys of BF 760 X3 via ribbon cable to keyboard unit X1
X60
Potentiometer of keyboard unit via ribbon cable (enclosed) to machine operating
panel X10
S, X11
Connection for spindle-speed override potentiometer
(pre-assigned by HEIDENHAIN)
F, X19
Connection for feed-rate override potentiometer. There are two connections—
preassigned by HEIDENHAIN depending on the arrangement of the feed-rate
potentiometer.
E, X17
Connection for rapid-traverse override potentiometer. There are two
connections—preassigned by HEIDENHAIN depending on the arrangement of
the rapid-traverse potentiometer.
F, X16
Connection for feed-rate potentiometer, alternative to X19
E, X22
Connection for rapid-traverse override potentiometer, alternative to X17
X27
Not used
July 2013
3.38 TE 745 (FS) keyboard unit
373
Advertisement
Table of Contents
