Table of Contents
Advertisement
Overwriting the
geometry
description
July 2013
Individual cells of the description table can be overwritten from within a
machining program.
Enter the code number 555343.
Press the ENTRY IN KINEMATIC TABLE soft key.
With the WRITE TO KINEMATIC AT COLUMN <column to be written to>
CAPTURE <searched column> KEY <keyword> =<value> command you can
overwrite individual cells in the active kinematics description in the Program
Run operating modes. The line is selected by searching the CAPTURE column
for the entry KEY. The column COLUMN is overwritten with <value>.
Example 1:
Vertical machining center, B-rotary table in the W axis, machine quill in Z
z
The position of the W axis must be considered in the kinematics table in order
to use the tilting functions. For example, an NC macro can be programmed
before the tilting function. This macro includes the current position of the W
axis in the calculations of the kinematics table.
6.5 Tilting and swivel axes
w
B
733
Advertisement
Table of Contents
