Configuring The Plc Inputs/Outputs With Ioconfig - HEIDENHAIN iTNC 530 HSCI Technical Manual

3.20 Configuring the PLC inputs/outputs with IOconfig

July 2013
3.20 Configuring the PLC inputs/outputs with IOconfig
The PC program IOconfig is used to configure the PLB 6xxx input/output
modules connected via the HSCI network. The program has previously been
used to describe a PROFIBUS system, and now it also includes the HSCI
system. If desired, IOconfig creates the configuration file (IOC file) and symbol
definition file (DEF file) for the control or the PLC program.
The following properties (and others) of the HSCI system are defined with
IOconfig:
Position of all input/output modules in the HSCI system (PL 6xxx with

associated PLD-H and PLA-H modules, MB 6xx/7xx and UEC 11x)
Definition of all I/Os freely available to the OEM on PLD-Hs, PLA-Hs and MB

6xx/7xx and UEC 11x.
Assignment of symbolic names, PLC operand addresses and other

properties of the individual terminals (I/Os)
For more information about using IOconfig and configuring the HSCI I/Os,
please refer to the program's online help.
291