Tapping With Floating Tap Holder And Coded Spindle-Speed Output - HEIDENHAIN iTNC 530 HSCI Technical Manual

6.12.8 Tapping with floating tap holder and coded spindle-speed output

976
The dwell time for rotational direction reversal (MP7120.0) and the
programmed dwell time have the same effect as the nominal speed value
output.
The following diagram shows the time sequence of the cycle:
MP7120.1 Advanced switching time of the spindle during tapping
with coded spindle-speed output
Input: 0 to 65.535 [s]
HEIDENHAIN Technical Manual iTNC 530 HSCI