Table of Contents
Advertisement
Displaying the
status of an option
Options for
the OEM
July 2013
The status of an option (enabled or not) can be displayed either as a menu by
entering the code number SIK (see previous pages), or bit-encoded after
pressing the MOD key in the OPT line.
Each bit has the following meaning:
OPT: %xxxxxxxxxxxxxxxx
The SIK options 101 to 130 are available as OEM-specific options for you, the
machine tool builder. You can assign your own OEM-specific software options
to these options.
This makes it possible for you to enable your own applications (e.g. cycles) for
the end user via the SIK from HEIDENHAIN.
The options can be enabled by entering a code number. HEIDENHAIN can give
you the code number after having been informed of the SIK number. You also
have the possibility of creating a temporary key for these OEM-specific
options in order to enable the options for a period of max. 90 days.
The PLC Module 9067 enables you to request the status of the SIK options.
Use this module to request information from the SIK about whether certain
software options are enabled via the SIK. Depending on the response, you can
activate the software option via the PLC program.
2.7 Software
Bit 0: 1st additional control loop
to
Bit 7: 8th additional control loop
Bit 8: Software option 1
Bit 9: Software option 2
Bit 10: Reserved
to
Bit 15: Reserved
149
Advertisement
Table of Contents
