X90: +24 V Nc Output Of The Uxc 11X (Fs) - HEIDENHAIN iTNC 530 HSCI Technical Manual

3.8.3 X90: +24 V NC output of the UxC 11x (FS)

Assignment
Load capacity
Current
consumption of the
HSCI components
230
Connecting Assignment
terminal X90
+ or terminal 1 +24 V NC (max. 3.5 A)
– or terminal 2 0 V
Attention
The interface is electrically separated (protective extra-low voltage (PELV)
as per EN 61800-5-1).
Device
UEC 11x (FS)
Device
MC 6110 or MC 7110
MB 620 or MB 720
(including all PLC outputs)
PL 62xx
(incl. TS and TT)
PL 61xx
Example: Typical TNC 620 configuration with UEC 11x
Device
MC 6110 or MC 7110
MB 620 or MB 720 (including all PLC
outputs)
PL 61xx
Total
A PSL 130 unit is not needed for this application. The +24 V NC supply of the
UEC 11x (X90) suffices for the connected components.
Load capacity of 24 V NC supply (X90)
3.5 A
Current consumption of the 24 V NC
supply
1.8 A
1.0 A
0.5 A
0.2 A
Current consumption 24 V
NC
1.8 A
1.0 A
0.2 A
3.0 A < 3.5 A
HEIDENHAIN Technical Manual iTNC 530 HSCI