Table of Contents
Advertisement
3 Mounting and electrical installation
3.1 General information
3.1.1 Safety precautions
July 2013
Attention
Remember the following during mounting and electrical installation:
National regulations for power installations
Interference and noise immunity
Operating conditions
Mounting attitude
Danger
Ensure that the main switch of the control or machine is switched off when
you engage or disengage connecting elements or connection clamps.
Danger
Ensure that the grounding conductor is connected. Interruptions in the
equipment grounding conductor may cause damage to persons or
property.
Danger
Incorrect or non-optimized input values can lead to faulty machine
performance and therefore to serious injury to persons and damage to
equipment. Modifications of the machine configuration should be done
with caution and uncontrolled axis motions should be taken into account.
Attention
In order to be able to judge the behavior of an NC controlled machine, you
need to have fundamental knowledge about drives, inverters, controls and
encoders. Inappropriate use may cause considerable damage to persons or
property.
HEIDENHAIN does not accept any responsibility for direct or indirect
damage caused to persons or property through improper use or incorrect
operation of the machine.
3.1 General information
181
Advertisement
Table of Contents
