Equivalent File Name Extensions In Ascii And Binary Format - HEIDENHAIN iTNC 530 HSCI Technical Manual

Hide thumbs Also See for iTNC 530 HSCI:

Table of Contents

Equivalent file name extensions in ASCII and binary format

Press the NCV → iTNC soft key.

In the upper part of the window, you select the folder containing the *.zip

file of the new NC software. The folder contents are displayed in the lower

part of the window.

To switch to the lower part of the window, press the FILES soft key. To

return to the upper part of the window, use the PATH soft key. In the lower

part of the window, select the *.zip file of the new NC software with the

cursor keys and press ENT. Following that, the NC software exchange will

All NC software versions that exist in the control are shown in the following

Select the new NC software with the arrow keys and press the SELECT soft

key. The selected NC software is marked with an asterisk (*) in the Sel

column. Confirm your selection with the YES soft key. The control activates

the selected NC software and performs a reset. Press the END key, the NO

soft key or the END soft key to exit the list box without making a new

If required, complete or delete the machine parameters.

While in the Programming and Editing operating mode, press the MOD key.

Enter the code number 95148 and confirm your entry with the ENT key.

While in the Machine-parameter programming mode, press the MOD key.

Press the UPDATE DATA soft key.

Press the ASC → BIN soft key to convert the files on the hard disk from

ASCII format back to binary format.

Read-in files which you had saved to a PC.

The NC software exchange is completed.

With the COPY SAMPLE FILES soft key, the HEIDENHAIN standard tables for

cutting data, the tilting-axis geometry, and the M-function macros as well as

a prototype for a freely definable table (contains only the column Name) can

be copied into the corresponding directories.

2.7 Software