Com Ports Leds - Novatel ProPak6 User Manual

Operation
3.1.3.1 User Configurable Status Indicators
Some of the LEDs on the ProPak6 front panel have configurable threshold settings that determine when
the LED changes color and states. The five user configurable LEDs are:
• Satellite Tracking 1 and 2 (refer to Section 3.1.8, Satellite Tracking and Positioning LEDs on
page 37 for LED status states)
• GNSS Positioning 1 and 2 (refer to Section 3.1.8, Satellite Tracking and Positioning LEDs on
page 37 for LED status states)
• Data Logging (refer to Section 3.7, Logging and Retrieving Data Overview on page 57 for LED
status states)
The LEDCONFIG command is used to configure a specific indicator LED. All configuration settings,
except the two GNSS positioning LEDs, take two parameters: one value determines when the LED turns
red and the other value determines when it turns amber (with the default setting outside the value range
being green). Refer to the LEDCONFIG command in the
OM-20000129 for details.
3.1.3.2 Fixed Status Indicators
The fixed LEDs are:
• Power (refer to Section 3.2.1, Applying Power to the Receiver on page 43 for LED states)
• INS (refer to Section 3.1.7, INS and ALIGN LEDs on page 36 for LED states)
• ALN (ALIGN/Heading) (refer to Section 3.1.7, INS and ALIGN LEDs on page 36 for LED states)
• COM 1, 2 and 3 (refer to Section 3.1.4, COM Ports LEDs on page 35 for LED states)
• Wi-Fi (refer to Section 3.1.6, Wi-Fi LED on page 36 for LED states)
• Bluetooth (refer to Section 3.1.5, Bluetooth LED on page 36 for LED states)
• USB Host (refer to Section 3.1.10, Universal Serial Bus (USB) Port and LEDs on page 39 for LED
states)
• Cell (refer to Section 3.1.9, Cell Port and LED on page 39 for LED states)
3.1.4

COM Ports LEDs

The COM LEDs for COM1, 2 and 3 are on the front of the ProPak6. The LEDs indicates if data is in the
process of being transmitted or received.
COM1, COM2, COM3
Off
Green (blinking)
Red (blinking)
Green (solid)
Refer to the LEDCONFIG command in the
additional details
.
ProPak6 Installation and Operation User Manual Rev 4
LED State
no activity
RS-232 Transmitting data (Tx)
RS-232 Receiving data (Rx)
RS-422 all states
OEM6 Firmware Reference Manual
OEM6 Firmware Reference Manual
Status LED
Description
OM-20000129 for
-
Chapter 3
-
35