Oxygen Sensor Dmc Install; Figure 7-67. Installing The Oxygen Sensor Dmc - Thermo Scientific 42iQHL Instruction Manual

Servicing
Optional DMC Oxygen Sensor
Oxygen Sensor DMC
7-64 42iQHL Instruction Manual
Use the following to install the oxygen sensor DMC.
Install
Equipment required:
Phillips drive, #2
1. Slide oxygen sensor assembly downwards.
Note Make sure oxygen sensor plate goes over the partition panel keyway
stud. ▲
Figure 7–67. Installing the Oxygen Sensor DMC
2. Slide oxygen sensor assembly right.
Note Make sure oxygen sensor plate fits under the stud.
Note Make sure oxygen sensor plate slides into side pocket.
3. Using a #2 Phillips drive, fasten captive hardware.
▲
▲
Thermo Scientific