Main Menus And Keypads - Thermo Scientific 42iQHL Instruction Manual

Main Menus and
Thermo Scientific
The Main Menu buttons, located on the Home Screen, contains three
submenus. Each submenu contains related instrument settings. This
Keypads
chapter describes each submenu and screen in detail. Refer to the
appropriate sections for more information.
Calibration
Calibrate Backgrounds
 Calibrate NO Background
 Calibrate NOx Background
Calibrate Span Coefficients
 Calibrate NO Span Coefficient
 Calibrate NO2 Span
Coefficient
 Calibrate NOx Span
Coefficient
Zero/Span Schedule
Calibrate O2 Span Coefficient
(Optional)
Advanced Calibration
 Manual Calibration
 Adjust Backgrounds
 Adjust NO
Background
 Adjust NOx
Background
 Adjust Coefficients
 Adjust NO Span
Coefficient
 Adjust NO2 Span
Coefficient
 Adjust NOx Span
Coefficient
 Reset Bkg and Span Coef
 Manual O2 Calibration
(Optional)
 2‐Point O2 Calibration
(Optional)
 Calibration History
Data
View Data Log (Last Hour)
 Graph
View Data Log (Last 24 Hours)
 Graph
View Data (User Defined Time)
 Start Time
 End Time – View Data
 Graph
Advanced Data
 Data Logging Setup
 Streaming Data Setup
User Contact Information
Update Bootloader
Operation
Instrument Display
Settings
Health Check
 Status and Alarms
 Predictive Diagnostics
 Maintenance
 File Sharing and Support
 iQ360
 Firmware Version
Measurement Settings
 Averaging Time
 Range Mode Selection
 Range Settings
 Gas Mode
 Gas Units
 Dilution Ratio
 Advanced Measurement
 Reaction Chamber
Settings
 Auto/Manual Mode
 Compensation
 Pressure Calibration
Communications
Instrument Settings
 Title Bar Setup
 Instrument Setpoints
 Alarm Setpoints
 Ozonator Safety
 PMT Supply
 Ozonator Supply
 Display Setup
 Clock
 Language
 Bypass Pump Power
 Reboot Instrument
Configuration
Security Access Levels
USB Drive
 Firmware Update Via USB
Drive
 Download Data to USB Drive
 Change USB Password
42iQHL Instruction Manual 3-5