Range Settings - Thermo Scientific 42iQHL Instruction Manual

Operation
Settings

Range Settings

3-88 42iQHL Instruction Manual
The Range Settings screen defines the concentration range of the analog
outputs. For example, an NO
output to concentrations between 0 and 50 ppm.
The screen shows the current NO, NO
is similar for the single, dual, and auto range modes. The only difference
between the screens are the words "High" or "Low" displayed to indicate
which range is displayed. For more information about the dual and auto
range modes, see "Range Mode
Setting, High Range Setting or Low Range Setting, brings up a numeric
keypad whereby the user can select a range.
Home Screen>Settings>Measurement Settings>Range Settings (single
range mode)
Home Screen>Settings>Measurement Settings>Range Settings (dual or
auto range mode)
The Range Settings screen contains the following information:
NO Range Setting: Sets the NO concentration range for the analog
●
outputs when in single range mode.
range of 0–50 ppm restricts the NO
2
, and NO range. The range screen
2 x
Selection" on page 3-86. Pressing Range
analog
2
Thermo Scientific