Thermo Scientific
The Point 1 screen allows the user to view and set the selected calibration
Point 12
point. The point 2 screen functions the same way. Therefore, the following
example of point 1 screen applies to point 2 as well.
Home Screen>Calibration>Advanced Calibration>2-Point O
Calibration>Continue to 2-Point O
The Point 1 screen contains the following information:
Edit O
●
Current O
●
Edit O
button, the Point 1 Concentration value is updated.
Calibrate O
●
Span Concentration: User enters O
2
Concentration: Read only. After selecting the value on the
2
Concentration button and after pressing the Calibrate O
2
: Calibrates point 1 coefficient.
2
Calibration>Point 1
2
span concentration.
2
42iQHL Instruction Manual
Operation
Calibration
2
2
3-33