Technician Interface - Bay Networks BayStack ARN Routers none Installation And Operating Manual

7.
Testing local IP interface
ping -IP 192.32.00.000 -r5
IP ping:
IP ping:
IP ping:
IP ping:
IP ping:
This test attempts to ping the Site Manager workstation.
NOTE: If routing has not yet converged, an attempt
Type q<return> to cancel this test.
Enter IP address of Site Manager workstation:
Figure B-2.
8.
9.
10.
Once the router creates and tests the configuration, it starts using the configuration
information you entered. Refer to Configuring Routers to configure the router
using Site Manager.
114200 Rev. A
Name and save the configuration file.
The script begins to test the configuration on the new IP interface
(Figure B-2).
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
192.32.00.000 is alive (size - 16 bytes)
to ping the Site Manager workstation may fail.
this happens, you may either enter a new IP address or
quit and wait a short period of time and try again from
the TI command line.
Starting the IP Interface Test
To continue the IP configuration test, enter the IP address for the Site
Manager workstation.
To cancel the test, enter
Choose whether you want to configure another module/port.
If you enter , (to stop configuring modules/ports), the Technician Interface
n
prompt appears. If you enter
When the Technician Interface prompt reappears, enter

Technician Interface.

Using Local Boot (the Quick-Start Procedure)
.
q
, you return to Step 6 of this procedure.
y
If
to exit the
logout
B-17