Bay Networks BayStack ARN Routers none Installation And Operating Manual page 118

Installing and Operating BayStack ARN Routers
5.
6.
Table B-2.
Task
Accept a default value
Repeat a step (for
example, if you make a
mistake)
Stop the Quick-Start
installation procedure
B-16
Type the following command and press the return key:
run inst_arn.bat
Follow the script online, using your worksheets when responding to its
prompts.
Refer to the list of commands in
Quick-Start Commands
The script prompts you for the following information (in the order given):
a. The initial Global Worksheet information
b. Specific protocol information
c. Wide area protocol selection
d. Specific protocol information
e. The rest of the Global Worksheet information
After you enter all of the Global Worksheet protocol information, the script
displays a Configuration Summary and prompts you to save the configuration
to a file.
Table B-2.
Action Details
Press return Your console displays default values in
brackets; for example, [E11].
Press Control-c When prompted, "Terminate script y/n?"
Press n press the n key. You return to the
beginning of the step so that you can
reenter the information.
Press Control-c When prompted, "Terminate script y/n?"
Press y press the y key. The procedure is
terminated and you return to the
Technician Interface prompt.
To restart the Quick-Start/Power-Start
procedure, you must reboot the router by
entering
boot
.
114200 Rev. A