Router Protocol Worksheets - Bay Networks BayStack ARN Routers none Installation And Operating Manual

Global Information Worksheet
Step Requested Information
6 Do you want to enable TI
TELNET (y/n) [n]:
7 Do you wish to save this
configuration to a file? (y/n) [y]
Enter filename [ startup.cfg ]:
Do you wish to set up another
port/module? (y/n) [y]

Router Protocol Worksheets

This section contains requested information and possible options relating to the
routing protocol choices on the Global Worksheet.
RIP Worksheet
Requested Information
Should RIP listen to the default route?
(y/n) [n]:
114200 Rev. A
Using Local Boot (the Quick-Start Procedure)
(continued)
Options
y(es)
n(o)
Enabling TELNET is optional.
y(es)
n(o)
We recommend using the default
filename.
y(es)
n(o)
Options
y(es)
n(o)
Note: RIP listens to a specific
network or subnet route where
Site Manager is located.
Answering y(es) to this request
forces RIP to also listen to the
default route (0.0.0.0). This is
useful when no specific route is
available in the RIP updates that
the router receives.
Your Response
Press the Return
key.
Press the Return
key.
n
Type and press
the Return key.
Your Response
B-7