Romes Mode - R&S TSMA6 Getting Started

®
R&S TSMA6
6.3.5

ROMES Mode

The ROMES mode is only displayed if the ROMES setup has been execu-
ted (see R&S TSMA6 user manual).
General
In the "ROMES" mode, the ROMES software is hosted on the R&S TSMA6 and
the selection of a valid workspace file is required.
In this mode, ROMES software starts with the configured workspace file.
Prerequisites
● A ROMES license dongle must be connected to a USB port of the
R&S TSMA6.
● To control a ROMES measurement via IP from an external host PC, the
ROMES option ROMES4RCO is required.
● After the installation, R&S ROMES must be started first time manually via the
program icon. Then the required directory structure is created on the
R&S TSMA6 and the workspace file can be selected via web-GUI (see
ter 6.4, "Import of Workspace Files (NESTOR,
To use the R&S TSMA6 with R&S ROMES, the following steps must be per-
formed.
1. In the web GUI, set the "Mode of Operation" to "ROMES" and press "Submit".
2. Configure the following settings.
● Workspace File
Getting Started 4900.8040.02 ─ 07
Configuring the R&S TSMA6
Measurement Modes
ROMES)", on page 41).
Chap-
39