Encoder Input Option Selection - Mitsubishi Electric A800 Plus Series Function Manual

Encoder input option selection

9.5
Encoder input option selection
Select the option (plug-in option / control terminal option) used for the motor (encoder) signal input and the option used for the
line speed command / actual line speed input.
Pr. Name
862
Encoder option selection
C242
• Select the option used for the motor (encoder) signal input and the option used for the line speed command / actual line
speed input. (Plug-in option / control terminal option)
• The options are selected according to the setting in Pr.862 Encoder option selection.
Control terminal
Plug-in option
∗1
Installed
Installed
Not installed
Installed
Not installed
∗2
Not installed
∗1 When two or more options among the FR-A8AP, FR-A8APR, FR-A8AL, and FR-A8APS are installed, the option with highest priority is enabled.
FR-A8AL > FR-A8APS > FR-A8APR > FR-A8AP
∗2
When the option is not installed, the pulse input value "0" is applied to the operation.
∗3 Line speed command / line speed input using the FR-A8APR is invalid.
NOTE
• When the same option is used for the signal input from the motor (encoder) and the line speed command input (Pr.361) or
actual line speed input (Pr.362), the signal input from the motor (encoder) is enabled.
194
ROLL TO ROLL FUNCTION RELATED PARAMETERS
Initial value
0
Motor (encoder)
option
signal
Plug-in option
Plug-in option
∗2
—
—
∗2
Setting
range
Signals from the motor (encoder) is input through the
0 plug-in option (FR-A8AP/FR-A8AL/FR-A8APR/FR-
A8APS).
Signals from the motor (encoder) is input through the
1
control terminal option (FR-A8TP).
Pr.862 = "0"
Line speed
command /
actual line speed
Control terminal
option
—
Control terminal
option
—
Description
Pr.862 = "1"
Line speed
Motor (encoder)
command /
signal
actual line speed
Control terminal
Plug-in option
option
— Plug-in option
Control terminal
—
option
— —
∗3
∗3