Mitsubishi Electric A800 Plus Series Function Manual page 241

REVISIONS
Revision date *Manual number
Jan. 2016 IB(NA)-0600622ENG-A
Jun. 2016 IB(NA)-0600622ENG-B
Oct. 2017 IB(NA)-0600622ENG-C
Aug. 2018 IB(NA)-0600622ENG-D
240
IB(NA)-0600622ENG-D
*The manual number is given on the bottom left of the back cover.
First edition
Addition
• Calibration parameters for the compensation value added to the line speed
command (Pr.635 to Pr.638)
Addition
• PID upper/lower limit hysteresis width (Pr.137)
• Empty reel inertia (integer/exponent) (Pr.753, Pr.754)
• Parameters related to cumulative pulse (Pr.755 to Pr.758)
• Winding length increment selection (cm/mm) (Pr.1262 = "4, 5")
• Parameters related to stored winding length (Pr.1298, Pr.1299)
• Winding length detection (upper 4 digits) (Pr.1346)
Addition
• Parameters (Pr.85, Pr.86, Pr.565, Pr.566, Pr.617, Pr.675, Pr.801, Pr.1348,
Pr.1349, Pr.1480 to Pr.1492)
• Parameter setting range (Pr.14, Pr.52, Pr.75, Pr.178 to Pr.189, Pr.190 to
Pr.196, Pr.288, Pr.414, Pr.502, Pr.681, Pr.774 to Pr.776, Pr.803, Pr.992)
• Tension sensor feedback torque control
• Speed control of intermediate shafts
• Application examples
Revision