Table of Contents
Advertisement
Over The Air Programmer Demonstration
Figure 10-11. Validate and Export Solution
The application is ready to open in IAR Embedded Workbench and ready for download to the chosen
board. Download the Accelerometer image by following the procedure in
Section 1.1, "Loading
Applications Into a Board Using the JTAG J-Link ARM
Debugger".
Once the application is running on the board, users can re-program the board over the air using the OTAP
Programmer Board.
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
10-8
Freescale Semiconductor
Advertisement
Table of Contents
