Table of Contents
Advertisement
Over The Air Programmer Demonstration
5. To select and send a
file as a text file using the serial terminal, click on Transfer -> Send File
.srec
and the Send Text File window appears as shown in
Figure
10-6. Select the appropriate
file,
.srec
then click on the Open button.
Figure 10-6. Downloading the Image to the OTAP Programmer
Ensure that the application being loaded is an OTAP Enabled application. This example uses the
Wireless UART.
When the file transfer is complete, the serial terminal displays the main menu again as shown in
Figure
10-7.
Figure 10-7. Transferring the Image to the OTAP Programmer
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
10-5
Advertisement
Table of Contents
