Connecting To A Network Node - NXP Semiconductors MC13224V User Manual

Weather Station Demonstration
Figure 9-6 shows the Network Node (SMAC Coordinator) connected to the PC and the Sensor Node
(SMAC Sensor) communicating with the Coordinator. As shown in this figure, the icons on the PC screen
represent the values as sensed by the Sensor Node.
9.3.2

Connecting to a Network Node

To run the Weather Station PC application, perform the following tasks:
1. Launch the
Weather Station.exe
Weather Station -> Weather Station.
The Weather Station main window appears as shown in
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
9-6
Figure 9-6. Weather Station System Setup
. Click on Start -> Programs->Freescale BeeKit ->
Figure 9-7. Weather Station Main Window
Figure 9-7.
Freescale Semiconductor