Table of Contents
Advertisement
Weather Station Demonstration
4. With the "Weather Station Sensor Node" highlighted, click on Project -> Rebuild All.
The folders Release, Debug, and the settings are now created in the project structure similar to what is
shown in
Figure
9-3.
The
Weather Station Controller.bin
[My Solution Directory]\Weather Station Controller\Release\Exe\
The
Weather Station Sensor Node.bin
[My Solution Directory]\Weather Station Sensor Node\Release\Exe\
5. Load the
Weather Station Controller.bin
boards using the JTAG connection. To download the image, connect the J-Link ARM debugger and
press [Ctrl]+D or just click the Debug button at the IAR Embedded Workbench IDE.
6. At this point the weather station is running without the PC Application. After showing the
Freescale logo, the "Wind Speed" screen appears on the Network Node LCD display as shown in
Figure
9-4.
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
9-4
Figure 9-3. Release, Debug, and Settings
file is placed at the following directory location:
file is placed at the following directory location:
and
Weather Station Sensor Node.bin
files to the
Freescale Semiconductor
Advertisement
Table of Contents
