5. From the Weather Station main window, click the RUN button.
6. The application starts as shown in
7. Click the Stop button to halt the application.
8. Click the Run button to start the application again.
While the Weather Station PC application is running, users can change the measurement units and
clear the buffer.
It is not possible to change the Log, Load, or Communication Settings
configuration of the Weather Station PC application while it is running.
9. To change measurement units, click on Settings -> Measurement Units.
10. To clear the buffer, click on Settings -> Clear Buffer.
Figure 9-14. Changing Measurement Units or Clearing Buffer
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
Figure
9-13.
Figure 9-13. Weather Station Running from a Log File
NOTE
Weather Station Demonstration
9-9