Table of Contents
Advertisement
Generic Application Demonstration
2. Select "Release" in the Workspace window.
3. Click on Project -> Rebuild All.
The folders Release, Debug, and the settings are now created in the project structure as shown in
Figure
6-2.
The
WirelessUART.bin
[Project Directory]\Release\Exe\
4. Load the
Generic Application
interface to the board, then click the Debug button at the IAR Embedded Workbench IDE.
5. Use a PC terminal communications program, such as Hyper Terminal, and set the correct baud rate,
data bits, parity, COM port, and flow control.
RS232 settings.
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
6-2
Figure 6-2. Release, Debug, and Settings
file is placed at the following directory location:
file to a board using the JTAG interface. Connect the JTAG
Figure 6-3
Figure 6-3. Default SMAC RS-232 Settings
shows the default MC1322x SMAC
Freescale Semiconductor
Advertisement
Table of Contents
