Table of Contents
Advertisement
The folders Release, Debug, and the settings are now created in the project structure as shown in
Figure
8-3.
The
Repeater.bin
[Project Directory]\Release\Exe\
4. Load the
Repeater
board.
5. Use a PC terminal communications program, such as Hyper Terminal, and set the correct baud rate,
data bits, parity, COM port, and flow control.
RS232 settings.
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
Figure 8-3. Release, Debug, and Settings
file is placed at the following directory location:
file to the board. Click the IAR Debug button to download the application to the
Figure 8-4. Default SMAC RS-232 Settings
Figure 8-4
shows the default MC1322x SMAC
Repeater Demonstration
8-3
Advertisement
Table of Contents
