Simple ZigBee Test Client (SZTC) Demonstration
4. Connect the board that is running the WirelessUART application to the serial port of the PC and
press that board's reset button. A message appears on the PC display as shown in
5. Open the Freescale Test Tool located in the following directory:
Programs/Freescale BeeKit/Test Tool
6. As shown in
Figure
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
7-2
Figure 7-1. Wireless UART Application
7-2, from the Test Tool window, select Tools -> Communication Settings.
Figure 7-2. Test Tool Communication Settings
Figure
7-1.
Freescale Semiconductor