6. Use a PC terminal communications program, such as Hyper Terminal, and set the correct baud rate,
data bits, parity, COM port, and flow control.
RS232 settings.
7. In the PC terminal program, set the properties in the optional settings as shown in
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
Figure 10-2. Default OTAP RS-232 Settings
Figure 10-3. Additional Terminal Program Settings
Over The Air Programmer Demonstration
Figure 10-2
shows the default MC1322x SMAC
Figure
10-3.
10-3