Downloading An Otap-Enabled Image To The Otap Programmer Board - NXP Semiconductors MC13224V User Manual

Over The Air Programmer Demonstration
10.3 Downloading an OTAP-enabled Image to the OTAP Programmer
Board
The OTAP Programmer Board does not have a
download a valid image to the OTAP Programmer Board using the serial terminal. To download the image,
complete the following steps:
1. Turn on the OTAP Programmer Board (1322x-Network Node).
2. Press SW2 on the 1322x-Network Node to enter the COM mode.
3. Once the board is in COM mode, the serial terminal displays the information as shown in
Figure 10-4.
4. Press D to download a
Figure 10-5. Send a Text (.srec) File to the OTAP Programmer
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
10-4
file (image) flashed on it by default. Users must first
.srec
Figure 10-4. OTAP Start Message
file, then click on Transfer -> Send Text File as shown in
.srec
Figure 10-5.
Freescale Semiconductor