Table of Contents
Advertisement
4. Select a hardware target board for the project and click on the finish button. Users can select any
available target board.
5. From the BeeKit main window (solution explorer area) select the Accelerometer and change the
OTAP Enabled attribute from False to True as shown in
6. Validate the solution as shown in
7. Export the solution as shown in
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
Figure 10-9. Select Accelerometer Application
Figure 10-10. Set OTAP Enabled to TRUE
Figure
10-11.
Figure
10-11.
Over The Air Programmer Demonstration
Figure
10-10.
10-7
Advertisement
Table of Contents
