Table of Contents
Advertisement
The
WirelessUART.bin
[Project Directory]\Release\Exe\
4. Load the
WirelessUART
click the Debug button on the IAR Embedded Workbench IDE.
5. Use a PC terminal communications program, such as Hyper Terminal, and set the correct baud rate,
data bits, parity, COM port, and flow control.
RS-232 settings.
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
Figure 2-3. Release, Debug, and Settings
file is placed at the following directory location:
application to the boards. Connect the JTAG interface to the board, then
Figure 2-4
Figure 2-4. Default SMAC RS-232 Settings
Wireless UART Demonstration
shows the default MC1322x SMAC
2-3
Advertisement
Table of Contents
